InspectAPedia ® | ||||||||||||||||||||||||||||
| Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice |
| |||||||||||||||||||||||||||
| Home | | | Air Conditioning |
| | Electrical - Energy Saving |
| | Environment Indoor |
| | Exteriors | | | Heating | | | Home Inspection |
| | Insulate - Ventilate |
| | Interiors | | | Mold Inspect/Test |
| | Plumbing Water Septic |
| | Roofing | | | Solar Energy |
| | Structure | | | Contact Us |
| Directory of Professionals to Inspect or Test a Building | ||||||||||||||||||||||||||||
|
InspectAPedia Blog - News Updates Air Conditioning & Heat Pumps Bookstore Electrical Environment Exteriors Heating Home Inspection Insulate Ventilate Interiors Mold Inspect/Test Plumbing Water Septic Roofing Structure Accuracy & Privacy Policies Contact Us |
Contact Information for Daniel Friedman
|
|
ONSITE INSPECTION / INVESIGATION AVAILABILITY NOTICE: due to an out of country assignment, between 25 February 2010 & 31 March 2010 I will not be available for onsite inspections without special travel arrangements.
Apologies for the inconvenience. During this time I will continue to be available for email or emergency telephone consultation described at this link for Immediate Telephone or Email Consulting |
|
AVAILABILITY NOTICE: due to a current assignment, my on-site services will be unavailable between 25 February 2010 & 31 March 2010. I will continue to offer consulting by email and telephone during that interval, and I will be scheduling field investigations and
lab services again after 31 March 2010. |
Services include: Environmental inspection & testing & building failure diagnosis for residential and commercial buildings, forensic laboratory services, building & mechanical system repair advice, indoor air quality, gases, mold inspection & testing, mold remediation consulting, mold causation studies, mold prevention advice. Moisture cause diagnosis, recommendations. Odor cause, diagnosis, remedy. Paint failure diagnostic field inspection, testing, & laboratory analysis. Thermal tracking, stains in buildings: field investigation, testing, diagnosis, recommendations. Forensic microscopy for particle identification and art conservation. (We no longer provide pre purchase home inspections.)
Forensic particle analysis laboratory & toxic mold test lab service - 24-hour turnaround for mail-in mold test samples; on-site forensic microscopy and mold test lab services available - American Industrial Hygiene Association AHIA member - Expert Home Inspections - ASHI-Certified (1986-2006), New York State License # 16000005303 (inception to 2008). & forensic investigations in New York, New Jersey, Connecticut, & Central Mexico.
On site diagnostic & forensic building investigation & consulting are available by appointment throughout North America. To absolutely preclude conflicts of interest, we do not work through referrals from real estate agents nor other parties who could create interests conflicting with those of our clients. To prevent conflicts of interest we do not perform mold cleanup nor make building repairs, though we can advise clients who require such services and can assist in contractor selection. Areas of expertise and building failures research are at InspectAPedia.com
Our site offers impartial, unbiased advice without conflicts of interest. We will block advertisements which we discover or readers inform us are associated with bad business practices, false-advertising, or junk science. our contact info is at InspectAPedia.com/appointment.htm.
...
|
Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website
InspectAPedia ® Home & Site Map
InspectAPedia Blog - News Updates
Air Conditioning & Heat Pumps
Bookstore
Electrical
Environment
Exteriors
Heating
Home Inspection
Insulate Ventilate
Interiors
Mold Inspect/Test
Plumbing Water Septic
Roofing
Structure
Accuracy & Privacy Policies
Contact Us
|
|
![]() The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems |
![]() Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab |
Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.
|
![]() Building Inspection, Problem Diagnosis, Forensic Investigation & Testing, Repair Consulting |
|
|
02/10/2010 - 03/06/1986 - InspectAPedia.com/appointment.htm - © 2010 - 1988 Copyright Daniel Friedman All Rights Reserved - InspectAPedia® is a Registered U.S. Trademark