InspectAPedia ®

Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice
InspectAPedia
Home
| Air
Conditioning
| Electrical | Indoor
Environment
| Exteriors | Heating | Home
Inspection
| Insulate
Ventilate
| Interiors | Mold
Inspect/Test
| Plumbing
Water
Septic
| Roofing | Structure | Contact Us
Directory of Professionals to Inspect or Test a Building


SEPTIC SYSTEMS HOME
SEPTIC INFO ARTICLES
HOME BUYERS GUIDE to SEPTIC SYSTEMS
SEPTIC SYSTEMS ONLINE BOOK
SEPTIC PUMPING REPAIR
SEPTIC TREATMENTS
SEPTIC CONSULTANTS
SEPTIC AUTHORITIES
  75-A.0 New York State Regulation of Private Septic Systems
  75-A.1 Introduction to Septic Systems, Definitions of Septic System Terms
  75-A.2 Regulation of Sewage Treatment Systems by other agencies
  75-A.3 Sewage flows and design flow estimates
  75-A.4 Soil and site appraisal for Septic Systems
  75-A.5 House or building sewer line specifications
  75-A.6 Septic tank capacity requirements, installation, and placement
  75-A.7 Distribution lines, distribution boxes, gravity flow, pressure distribution, dosing, siphons
  75-A.8 Subsurface treatment of effluent, absorption field requirements, leach field design criteria
  75-A.9 Alternative Septic System Designs
  75-A.10 Other systems
  75-A.11 New product/system design interim approval
SEPTIC SYSTEM BOOKS REFS CODES
SEPTIC SYSTEM DESIGN MANUAL - Online
SEPTIC SYSTEM DESIGN BASICS
SEPTIC SYSTEM DESIGN ALTERNATIVES
List Your Service/Product

More Information

InspectAPedia.comInspectAPedia ® Home & Site Map
InspectAPedia Blog - News Updates
Air Conditioning & Heat Pumps
Bookstore
Electrical
Environment
Exteriors
Heating
Home Inspection
Insulate Ventilate
Interiors
Mold Inspect/Test
Plumbing Water Septic
Roofing
Structure
Accuracy & Privacy Policies
Contact Us



New York State Septic System Design Regulations 75-A - Contents
InspectAPedia®  -    

  • Septic System Design Regulations - table of contents
Our site offers impartial, unbiased advice without conflicts of interest. We will block advertisements which we discover or readers inform us are associated with bad business practices, false-advertising, or junk science. Our contact info is at InspectAPedia.com/appointment.htm.

This document uses the New York State wastewater treatment standard for individual household septic systems (Appendix 75-A) to provide an example of state regulated design and installation of both conventional tank and leach field septic systems and alternative septic system designs, including raised septic systems, septic mound systems, intermittent sand filter septic systems, and evaportion-transpiration septic systems.

Citation of this article by reference to this website and brief quotation for the sole purpose of review are permitted. Use of this information at other websites, in books or pamphlets for sale is reserved to the author. Technical review by industry experts has been performed and is ongoing - reviewers welcomed and are listed at "References."

© Copyright 2010 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

APPENDIX 75-A to Public Health Law, 201(1)(1)
NEW YORK STATE
WASTEWATER TREATMENT STANDARDS - INDIVIDUAL HOUSEHOLD SEPTIC SYSTEMS

WASTEWATER TREATMENT DESIGN and REGULATION SECTION


75-A.1 Introduction to Septic Systems, Definitions of Septic System Terms
75-A.2 Regulation of Sewage Treatment Systems by other agencies
75-A.3 Sewage flows and design flow estimates
75-A.4 Soil and site appraisal for Septic Systems
75-A.5 House or building sewer line specifications
75-A.6 Septic tank capacity requirements, installation, and placement
75-A.7 Distribution lines, distribution boxes, gravity flow, pressure distribution, dosing, siphons
75-A.8 Subsurface treatment of effluent, absorption field requirements, leach field design criteria
75-A.9 Alternative Septic System Designs
75-A.10 Other systems
75-A.11 New product/system design interim approval

Share this Article      

...

Technical Reviewers & References

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

SEPTIC SYSTEMS HOME
SEPTIC INFO ARTICLES
HOME BUYERS GUIDE to SEPTIC SYSTEMS
SEPTIC SYSTEMS ONLINE BOOK
SEPTIC PUMPING REPAIR
SEPTIC TREATMENTS
SEPTIC CONSULTANTS
SEPTIC AUTHORITIES
  75-A.0 New York State Regulation of Private Septic Systems
  75-A.1 Introduction to Septic Systems, Definitions of Septic System Terms
  75-A.2 Regulation of Sewage Treatment Systems by other agencies
  75-A.3 Sewage flows and design flow estimates
  75-A.4 Soil and site appraisal for Septic Systems
  75-A.5 House or building sewer line specifications
  75-A.6 Septic tank capacity requirements, installation, and placement
  75-A.7 Distribution lines, distribution boxes, gravity flow, pressure distribution, dosing, siphons
  75-A.8 Subsurface treatment of effluent, absorption field requirements, leach field design criteria
  75-A.9 Alternative Septic System Designs
  75-A.10 Other systems
  75-A.11 New product/system design interim approval
SEPTIC SYSTEM BOOKS REFS CODES
SEPTIC SYSTEM DESIGN MANUAL - Online
SEPTIC SYSTEM DESIGN BASICS
SEPTIC SYSTEM DESIGN ALTERNATIVES

More Information on Building Diagnostic Inspections and Repairs

InspectAPedia.comInspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.
GO TO the MOLD and INDOOR ENVIRONMENT INFORMATION CENTER for in-depth advice on avoiding testing for or cleaning up mold and other indoor environmental hazards, odors, gases, contaminants
The Mold Information Center:
What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems
GO TO MOLD TEST KITS: This expert-recommended mold test kit is cheap and yet top performing *IF* you use a competent analysis laboratory!
Use this simple, economical mold test kit
by following our instructions on how to collect and mail mold samples to our lab
GO TO IAQ/MOLD-TEST LAB SERVICES: Mold, Pollen, indoor air quality, field and laboratory services by an expert.Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.
GO TO our PRE PURCHASE BUILDING INSPECTION SERVICES: Authoritative information for home buyers and home owners is included with your inspection.
Building Inspection, Problem Diagnosis
, Forensic Investigation & Testing, Repair Consulting

CONTACT Daniel Friedman - Dan is a senior ASHI home inspector, nationally recognized expert on building inspection, building failures, and sick building investigation
Contact Daniel Friedman for website content suggestions or for fee-paid consulting

10/23/2009 - 01/01/1995 - InspectAPedia.com/septic/NYS75-A.0.htm - © 2010 - 1988 Copyright Daniel Friedman All Rights Reserved - InspectAPedia® is a Registered U.S. Trademark