InspectAPedia ^®

Flood Damage Assessment: How to Safely Enter & Inspect a Building After a Flooding
InspectAPedia^®  -    

This chapter outlines how to enter a flood-damaged building after it has been flooded. We discuss when to stay out, when you can enter, and safety considerations on entry of flooded buildings. In the next article our Flood Response Checklist lists key actions you should take after building flooding to minimize mold damage, and includes some safety warnings. Our photograph shows a flooded home in Jasper, TX.

If your building has been flooded, this website provides an easy to understand guide for flood damage assessment, setting priorities of action, safety, and we provide special information about avoiding or minimizing mold damage.

We also list after-flood "anti-mold" procedures that do not work or are unsafe - to help you avoid unnecessary expense in dealing with mold after a building flood. If your building is already moldy or if you suspect mold related illness in your building, we link to a step by step Mold Action Guide dealing with toxic or allergenic indoor mold and other indoor contaminants: when and how to inspect or test for mold, when to hire an expert, how to clean up a moldy area, when and how to perform post-remediation mold testing. If your septic system has been flooded we link to an article outlining what to do about that system as well. Extensive, technically detailed in-depth articles on other mold detection, testing, and prevention methods are organized at our Mold Information Center .

© Copyright 2009 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

BUILDING ENTRY PROCEDURE - Procedures for Entering a Safe, Previously-Flooded Building

Hazards in and around flooded buildings include risk of structural collapse, risk of septic system collapse, trip and fall injury hazards, electrical shock hazards, fire and explosion hazards where natural gas or bottled gas are present, toxic sludge and materials containing waterborne bacteria, such as the E. coli and Enterococci bacteria, toxic mold growth indoors.

When entering buildings, use extreme caution. Building damage may have occurred where you least expect it. Watch carefully every step you take.

• Review the First Priorities before entering a flooded, storm-damaged, or earthquake damaged building.
• Do not work alone: if you fall or are injured and are alone you may not receive prompt assistance. If you must work alone despite this advice, be sure you have a working radio or cellphone to use to summons assistance.
• Wear sturdy shoes. The most common injury following a disaster is cut feet. If there is extensive visible mold, wear a HEPA-rated respirator during your initial walk-through, and if you are asthmatic or otherwise at particular risk, stay out of the building.

• Use battery-powered lanterns or flashlights when examining buildings. Battery-powered lighting is the safest and easiest, preventing fire hazard for the user, occupants, and building.
• Examine walls, floors, doors, staircases, and windows to make sure that the building is not in danger of collapsing.
• Inspect foundations for cracks or other damage. Cracks and damage to a foundation can render a building uninhabitable.
• Look for fire hazards. There may be broken or leaking gas lines, flooded electrical circuits, or submerged furnaces or electrical appliances. Flammable or explosive materials may travel from upstream. Fire is the most frequent hazard following floods.
• Check for gas leaks. If you smell gas or hear a blowing or hissing noise, open a window and quickly leave the building. Turn off the gas at the outside main valve if you can and call the gas company from a neighbor's home. If you turn off the gas for any reason, it must be turned back on by a professional.
• Look for electrical system damage. If you see sparks or broken or frayed wires, or if you smell burning insulation, turn off the electricity at the main fuse box or circuit breaker. If you have to step in water to get to the fuse box or circuit breaker, call an electrician first for advice. Electrical equipment should be checked and dried before being returned to service.
• Check for sewage and water supply line damage. If you suspect sewage lines are damaged, avoid using the toilets and call a plumber. If water pipes are damaged, contact the water company and avoid using water from the tap.

• Crawl spaces may be particularly dangerous for a variety of reasons such as the presence of sewage, mold, asbestos, rodents, chemicals, or structural collapse hazards. See CRAWL SPACE SAFETY ADVICE.
• Watch out for animals, especially poisonous snakes, that may have come into buildings with the flood waters. Use a stick to poke through debris. Flood waters flush snakes and many animals out of their homes.
• Watch for loose plaster, drywall, and ceilings that could fall.
• Take pictures of the damage, both of the building and its contents, for insurance claims.
• Throw away food that has come in contact with flood waters. Some canned foods may be salvageable. If the cans are dented or damaged, throw them away. Food contaminated by flood waters can cause severe infections.
• Drinking water: some possible sources of drinking water are described at How to Obtain Emergency Drinking Water. If the purity of a water source is suspect or unknown the water will need to be disinfected or sterilized.

• Drinking water wells that were inundated by flood waters should be pumped out and the water tested for purity before drinking. See our well sterilization procedure using household bleach which is detailed at When & How to Shock or Chlorinate a Well. If in doubt, call your local public health authority. Ill health effects often occur when people drink water contaminated with bacteria and germs.
• If drinking water is of questionable purity, boil the water for at least five minutes, and/or add bleach, and/or distill drinking water before using if a distiller and electrical power or an alternative heat source are available. See information on water treatment under the "Disaster Supplies Kit" section of some public documents.

Share this Article      

...

Technical Reviewers & References

Search InspectAPedia

• Daniel Friedman - principal author/editor of the InspectAPedia^® Website
• Critique, contributions wanted: Contact Us to suggest corrections or additions to articles at this website, and if you wish, to receive online listing and credit as a contributor. Particular thanks are due to the many experts and also consumers who read and critique technical articles at InspectAPedia.com.
• Mark Cramer Inspection Services Mark Cramer, Tampa Florida, Mr. Cramer is a past president of ASHI, the American Society of Home Inspectors and is a Florida home inspector and home inspection educator. (727) 595-4211 mark@BestTampaInspector.com 11/06
• Hankey and Brown home inspectors, Eden Prairie, MN, technical review by Roger Hankey, prior chairman, Standards Committee, American Society of Home Inspectors - ASHI. 952 829-0044 - hankeyandbrown.com 11/06
• Arlene Puentes, a licensed home inspector, educator, and building failures researcher in Kingston, NY. 11/29/06
• Repairing Your Flooded Home American Red Cross and FEMA - PDF - English
• Como Reparar su Hogar Inundado American Red Cross and FEMA - PDF - espanol
• Flood Cleanup - Avoiding Indoor Air Quality Problems US EPA Fact Sheet
• Cleaning Up After a Flood Texas Department of State Health Services.

Books & Articles on Building & Environmental Inspection, Testing, Diagnosis, & Repair

• Books, Complete List of Environmental Inspection, Diagnosis, Cleanup, Air Quality & Design, Inspection, Repair Books at the InspectAPedia Bookstore
• Environmental Health & Investigation Bibliography - our own technical library on indoor air quality inspection, testing, laboratory procedures, forensic microscopy, etc.

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

FLOOD DAMAGE ASSESSMENT, SAFETY & CLEANUP A Guide to Mold Cleanup Procedures
  FLOODS & MOLD CLEAN/PREVENT A Guide to Dealing with Flood Damage & Mold Prevention &r Cleanup of Flooded Homes
  FIRST PRIORITIES When Responding to a Flooded Building
  BUILDING ENTRY PROCEDURE How to Enter a Building After a Building Flood
  DRINKING WATER - EMERGENCY PURIFICATION How to purify emergency drinking water, how to remove odors
  DRINKING WATER - EMERGENCY SOURCES Where to find drinking water in an emergency
  ELECTRICAL SAFETY for Flood Damage Inspectors
  FLOOD DAMAGE TO FOUNDATIONS
  FLOOD RESPONSE CHECKLIST Checklist of Key Steps to Minimize Mold Damage After a Building Flood
  INEFFECTIVE MOLD PRODUCTS Ineffective Mold Products and Procedures to Avoid in Mold Cleanup/Prevention
  FURTHER STEPS PREVENT MOLD Further Steps to Avoid Mold Damage After a Building Flood
  WHEN TO STOP LOOKING FOR MOLD after Flooding: When is a Mold Cleanup Job Complete?
  GENERAL MOLD PREVENTION Preventing Future Mold After a Flooded Building Cleanup
  FLOOD DAMAGE RFERENCES References on Mold Prevention and Flood Damage
  FLOOD VENTS How to Use Flood Vents for Structural Protection from Flooding - Flood Venting in Foundations and Enclosures Below Design Flood Elevation
  SEPTIC SYSTEMS & FLOODS What to Do after a Flood - Septic Flood Response, Safety, Health, Maintenance, Repair Advice
  SEWAGE CONTAMINATION IN BUILDINGS how to detect and respond to sewage backups
  SEWAGE PATHOGENS in SEPTIC SLUDGE what are the contaminants in sewage
  Wind Damage to Roofs how to assess and identify wind damage to roofs

More Information on Building Diagnostic Inspections and Repairs

...

InspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Building Inspection, Problem Diagnosis, Forensic Investigation & Testing, Repair Consulting

Contact Daniel Friedman for website content suggestions or for fee-paid consulting