Mold Action Guide after Flooding: References on Mold Prevention and Flood Damage InspectAPedia® -
Reference documents for flood & storm damage assessment & cleanup
List of documents with techniques for mold cleanup, mold prevention, mold inspection & test procedures
Our site offers impartial, unbiased advice without conflicts of interest.
We will block advertisements which we discover or readers inform us are associated with bad business practices,
false-advertising, or junk science. Our contact info is at
InspectAPedia.com/appointment.htm.
This chapter lists references sources for dealing with flood damage to buildings, safe entry to flooded buildings,
and cleaning or preventing mold in flooded buildings.
If your building has been flooded, this website provides an easy to understand guide for flood damage assessment, setting
priorities of action, safety, and we provide special information about
avoiding or minimizing mold damage. These are quick, simple steps to minimize mold damage in a flooded building.
We also list after-flood "anti-mold" procedures that do not work or are unsafe - to help you avoid unnecessary expense in dealing with mold
after a building flood.
If your building is already moldy or if you suspect mold related illness in your building, we link to a step by step Mold Action Guide dealing with toxic or allergenic indoor mold and other indoor contaminants:
when and how to inspect or test for mold, when to hire an expert, how to clean up a moldy area, when and how to perform post-remediation mold testing. If your septic system has been flooded we link to an article outlining what to do about that system as well. Extensive, technically detailed in-depth articles on other mold detection, testing, and prevention methods are organized at our Mold Information Center
Critique, contributions wanted: Contact Us to suggest corrections or additions to articles at this website, and if you wish, to receive online listing and credit as a contributor. Particular thanks are due to the many experts and also consumers who read and critique technical articles at InspectAPedia.com.
Additional technical contributors & reference sources for this article are listed below.
Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.
Thanks to
Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.
Mark Cramer Inspection Services Mark Cramer, Tampa Florida, Mr. Cramer is a past president of ASHI, the American Society of Home Inspectors and is a Florida home inspector and home inspection educator. (727) 595-4211 mark@BestTampaInspector.com 11/06
Hankey and Brown home inspectors, Eden Prairie, MN, technical review by Roger Hankey, prior chairman, Standards Committee, American Society of Home Inspectors - ASHI. 952 829-0044 - hankeyandbrown.com 11/06
Arlene Puentes, a licensed home inspector, educator, and building failures researcher in Kingston, NY. 11/29/06
More Reading about Mold Cleanup and Mold Prevention
For more depth of understanding of mold prevention and mold or general building cleanup after flooding see these articles:
Action Guide for Mold what to do about mold, cleaning, removal, testing, hiring an expert or doing it yourself - a step by step guide to what to do about mold
Floods in Building Setting Priorities and Using Mold Resistant Building - quick steps after a building flood or plumbing leak can prevent costly mold contamination
Prevent Mold, How-To Correct the Causes of Mold and Prevent Indoor Mold or other indoor environment problems
Attic Condensation and Ice Dam Leaks - Detection and Correcting Venting and Condensation Problems in Buildings
How to Clean Moldy Wood Framing & Sheathing How to clean/seal mold from/on exposed lumber or plywood subfloor or roof sheathing indoors - some suggestions based on our field and laboratory research
Humidity: What indoor humidity should we maintain in order to avoid a mold problem?
Mold-Resistant Building Practices, advice from an expert on how to prevent mold after a building flood and how to prevent mold growth in buildings by selection of building materials and by anti-mold construction details.
Ozone Warnings - Use of Ozone as a "mold" remedy is ineffective and may be dangerous.
Mold FAQs Answers to Most Questions about Indoor Mold, Mold Related Illness, Mold Cleanup, Mold Prevention
More Information on Building Diagnostic Inspections and Repairs
...
InspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.
The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems
Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.