InspectAPedia ^®

A Directory of IAQ, Sick Building, Mold Allergen Testing, Building Investigation Service Providers
InspectAPedia^®  -    

• Directory of mold test companies
• Directory of environmental inspectors
• Contact us to suggest listings - no fee for qualified experts

For "sick house" or other building air quality, mold, mildew, dampness, odors, toxic gases, chemical exposure, or similar complaints, experts may perform a Phase I visual inspection expanded by actual bulk surface and air sampling combined with microscopic examination, and case histories to identify possible concerns.

The purpose air and bulk sampling is to identify possible irritants/bioaerosols: mold, mildew, pet dander, pollen, or other material which can cause respiratory distress or other complaints and in some cases serious illness.

Consult with your physician for evaluation, treatment, and advice. Qualified environmental inspection and test experts can be listed here at no fee.

© Copyright 2009 Daniel Friedman, All Rights Reserved. Information Accuracy & Bias Pledge is at below-left. Use links at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

First, should we be testing for mold at all? If you see mold on indoor surfaces, NO mold testing is needed to confirm that mold is present in a this building and that cleanup is needed. But if a large remediation project is planned, tests may be needed for project control - see When to identify mold?. See MOLD EXPERT, WHEN TO HIRE for a discussion of when it is or is not appropriate, justified, and ethical to hire a mold consultant to inspect, diagnose, and advise about mold contamination in a building.

 State Directory of Mold & Indoor Air Quality Building Inspection & Test Consultants

AK AL AR AZ CA CO CT DC DE FL GA HI IA ID IL IN KS KY LA MA MD ME MI MN MO MS MT NC ND NE NH NM NV NJ NY OH OK OR PA RI SC SD TN TX UT VA VT WA WI WV WY

• California mold consultants directory list: EAS-Environmental Assessment Services, info@easmold.com, Monterey/San Francisco Bay area, California 877-447-6294
  
• Georgia: Dalton: Walter H. Carter, Inc. whcdrm@alltel.net
  
• Massachusetts mold consultants directory list: and other locations:Jeff May, JMHI Home Inspections, Cambridge MA 617-354-0152
  
  
• New York State, NY City, Hudson Valley, Connecticut, & New Jersey mold consultants directory list:
  
  • Daniel Friedman, 845-463-0092 (available worldwide by arrangement). for Mold, IAQ, Toxic Gas, Sewage Contamination, Sick Building Inspection & Testing - author/editor of this InspectAPedia^® Website - diagnostic building inspection and testing, and forensic laboratory investigations and 24-hr laboratory response; on-site lab identification service available. Our Mold/IAQ onsite environmental services are described at FIELD INVESTIGATION SERVICES and at added details are more details about services we provide.
• Paul Gressin New York city area air quality consultant: Nassau, Suffolk, Brooklyn, Queens, Manhattan 516-295-2581
  
  
• New Jersey mold consultants directory list:
  • Steven Temes, is an industrial hygienist and certified microbial consultant specializing in is investigating the causes of building-related health effects. Mr. Temes can be reached at AirWays Environmental Services, P.O Box 8576, Red Bank, NJ 07701, 732-842-5564 (office) or 732-673-9914 cell, or by email to AIRWAYSENV@cs.com
  • Pete Engle, Rumson, NJ
• Ohio mold consultants directory list:
  • Al Tibbs 440-946-7191 closerlook@surfbest.net
  • Mike Moorhead, 740.321.1182 inspection for Mold, Radon &ct.
    
• Texas mold consultants directory list:
  • Austin TX - Dan Yates, PE CSP CIE MAC, dyates11@austin.rr.com Texas Licensed Mold Assessment Consultant, Registered Professional Engineer - Texas, Certified Indoor Environmentalist, Certified Safety Professional, Certified Thermographer, 17 years mold investigation experience, Expert witness, Hurricane disaster investigation experience.
  • Waco TX - Chad Cole, Mold Assessment Consultant, ESESIS Environmental Corp., Waco, TX 76710 - O-254-751-1961 or 800-231-2988 F-254-235-7038 C-254-733-1160 Email-chadesesis@grandecom.net
• Tennessee: Chattanooga: Walter H. Carter, Inc. 800-564-5537 whcdrm@alltel.net Company Resume
• Vermont: Ed at Lincon Technology, email: hvacr@sover.net, Randolph Center Vermont 05061, IAQ consulting, building air systems, Vermont, 24 Years in IAQ business, Refrigeration Service Engineers Society

Listing submissions by qualified IAQ & environmental testing and inspection experts are welcome - whose content, services are appropriate for our readers. To provide your link exchange information and our link exchange policy see InspectAPedia.com - Directory Listing & Link Exchange Instructions There are no listing fees & no conflicts of interest. We reserve the right to list or not list individuals or companies and to provide notice of consumer compliments or complaints.

• Mold Investigation Tips for Home Inspectors, an article written for NY Metro ASHI News
• Vista Check Environmental Data Base Search Service
• Guidelines for Selecting an Indoor Air Quality Consultant (This article, by traditional IH consultants, does not focus on most-current residential investigation methods.)
• AIHA guidelines on how to select an IAQ or Mold investigator. Also the Minnesota Department of Health has useful advice about hiring an investigator too.
• Directory of Associations & Resources: Air Quality, Bioaerosols, Mold, Pollen, Mycology, Sick House/Sick Building Information Sources

Share this Article      

...

Technical Reviewers & References

Search InspectAPedia

• Daniel Friedman - principal author/editor of the InspectAPedia^® Website
• InspectAPedia Bookstore lists recommended books, organized by topic & available for purchase. Most of our articles also include a list of recommended books for the specific article topic as well as other references, and information sources.
• Critique, contributions wanted: Contact Us to suggest corrections or additions to articles at this website, and if you wish, to receive online listing and credit as a contributor. Particular thanks are due to the many experts and also consumers who read and critique technical articles at InspectAPedia.com.
• Additional technical contributors & reference sources for this article are listed below.

Use links just below or at the left of each page to navigate this document or to view other topics at this website. Green links show where you are in our document or website.

Books & Articles on Building & Environmental Inspection, Testing, Diagnosis, & Repair

• Books, Complete List of Environmental Inspection, Diagnosis, Cleanup, Air Quality & Design, Inspection, Repair Books at the InspectAPedia Bookstore
• Environmental Health & Investigation Bibliography - our own technical library on indoor air quality inspection, testing, laboratory procedures, forensic microscopy, etc.

Add Your Listing & Support This Website by a Link Exchange (No Fees)

How to Add Your Listing - no fee: Qualified IAQ/Mold/Mildew/Pollen and bioaerosol investigators and laboratories: if you are qualified to serve residential or commercial properties and if you are committed to working without actual or apparent conflict of interest (your company does not inspect, test, and also remediate or repair buildings) you may qualify to be listed in this directory without charge.

The content at this website is provided by InspectAPedia.com^® as a public service and without any conflicts of interest. This directory receives no support from ASHI, CAHI, CREIA, nor other any home inspection nor from any real estate firm nor any other business, listed or not, at our website. The author reserves the right to list or not list individual or companies and to provide notice of consumer compliments or complaints.

EMAIL TO: Dan Friedman containing the information listed just below (just cut and paste this table into your email and fill in the data) and see the link-exchange text which follows this table of listing data:

We ask only a link exchange from your website to ours

Copy and paste the following HTML code to your website and send us a link to your page where it appears just below, or see our Link Exchange Test Page:

InspectAPedia.com ® - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards.

or if you prefer, use this alternative link code with graphic:

InspectAPedia.com^® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.

More Information on Building Diagnostic Inspections and Repairs

...

InspectAPedia® Home & Site Map - Building & Environmental Inspection, Testing, Diagnosis, Repair, & Problem Prevention Advice: In-depth research & advice on diagnosing, testing, correcting, & preventing building defects & indoor environmental hazards. Unbiased information, no conflicts of interest.

The Mold Information Center: What to Do About Mold in Buildings, When and How to Inspect for Mold, Clean Up Mold, or Avoid Mold Problems

Use this simple, economical mold test kit by following our instructions on how to collect and mail mold samples to our lab

Environmental Inspection, Testing, & Diagnosis On-Site IAQ, Gas, Air Testing, Mold Investigation, Sick Building Diagnosis, Lab Services, & Remediation Plan Preparation - indoor air quality testing, problem source determination, supporting lab work, written remediation plan addressing removal of environmental and other hazards and prevention of their recurrence.

Building Inspection, Problem Diagnosis, Forensic Investigation & Testing, Repair Consulting

Contact Daniel Friedman for website content suggestions or for fee-paid consulting